Saab 9-5 2010-2011 LED trunkbar repair kit (with gaskets & screws) “Black series”
This newly designed repair kit will have your lightbar shine in no time! I would doubt there is an easier solution available, other than sending it in to us of course!
New updated version “black series” with corrosion protection on outer leds, where the leds fail from moiusture….
Sure you’ve noticed the new generation Saab 9-5 rear light signature? Or maybe you’ve only seen the more common light signature failure? As trend breaking as the led trunk bar is, just as bad is the design of the circuit board and components. This newly developed repair kit for the trunk bar cures the bad circuit design and board design on the outer LEDs. It is designed to be as simple as it gets to replace, it fits in the original place, using same connectors. Push-lock connectors for the LED’s harness so you don’t have to solder! A step by step guide helps you get through the repair without too much thinking.
Some tools are required:
1x angle grinder or dremel (angle grinder will acctually give you a nicer cut)
1x tube of silicone to seal the light bar after replacing LEDs
This kit is including gaskets for the LED-bar, highly recommended to replace them since they’re wrong size from factory!
Manual is found under the tab “additional information” or https://hblom.se/downloads/LED_REPAIRKIT_HBLOM_V02.pdf
|Dimensions||15 × 10 × 3 cm|